---
layout: page2
title: Log4OM Web Status
---

[Git Repository](https://git.pickmy.org/nq4t/Log4OM-WebStatus)

Recently Log4OM added support for UDP message output in it's remote control. One of the settings has Log4OM automatically
send status messages every five seconds when the following conditions are met:

- CAT engine is running and connected to a valid radio
- Message output is enabled in program configuration

This can be used to build a very basic status display you can embed in a webpage.

### Requirements

A machine that can run Python scripts that can:

- Recieve UDP messages from Log4OM
- Put the resulting HTML file on a webserver

It is currently written to be running on the same machine as the webserver. Additional methods of getting the file to an
external machine have not been created due to the numerous ways of doing so. It's also written this way as I run a server
at my QTH that's accessible to the internet. 

### Example

I have embedded the status on the sidebar/menu of [my website](https://nq4t.com). The raw file lives [here](https://log.nq4t.com/radio.html)

My version has CSS applied to match my website. The default version does not. 

### Basic Theory Of Operation

Log4OM sends packets to my server's IP. Python picks these up, parses the required information out, and stuffs them in to
some HTML it saves directly to the server. This file is set to auto-refresh every 5 seconds.

If the UDP monitor doesn't get any packets within 6 seconds, it executes a routine to see what's up. This function merely sends the 
"Alive" command over the UDP Remote Port. Any response will indicate the radio is off; but a lack of response within 2 seconds assumes
that Log4OM is not running on the shack PC.

When the radio is off or Log4OM is not loaded; the code only sends the remote request every 60 seconds.