more code rewrite. bitmapped logo.

CHANGELOG

@@ -1,15 +1,35 @@
 CHANGELOG:
 
+Version 0.1.7:
+
+	Main:
+		Decided to try and comment changes better.
+			This at least gives a minor insight in to why I did it. I'll mark comments added later with an asterisk.
+			
+	Software:
+		Practically rewrote the main loop.
+			Instead of all the switch/case bullshit, I just dump to a variable and make that part of the
+			conditional IF statements.
+		Bitmapped the logo.
+			Fonts are large. The 98x24 bitmap was smaller.
+	
 Version 0.1.6:
 
 	Software:
 		Removed a bunch of functions in favor of passing arguments to function.
+			The indvidual functions for setting each input and setting the LCD have largely been combined
+			in to one since I figured out how to use arguments. Additional stuff changed/added to accomodate
+			this.*
 
 Version 0.1.5:
 
 	Hardware 
 		Removed 2003 ground from 595 enable line. (That was a stupid idea that thankfully didn't blow up.)
+			I calculated the relays to be 40mA each. Sinking that much current from an IO pin is pushing it, let alone
+			the fact I need two relays for phono inputs. 
 		Added logic invterter to drive the 595 enable and 2003 ground. (Transistor can sink more current).
+			The 2N2222 is rated for like...800mA or something; wayyyy more than I need. In retrospect, this would have been
+			a better solution overall than the reset circuit on the 595. Will I change it? I'll have to play with it.
 		
 	Software:
 		Flipped srEnable logic to drive logic inveter added to board.
@@ -21,6 +41,8 @@ Version 0.1.4:
 
 	Hardware:
 		Tied ULN2003/2803 ground to 595's enable line
+			Even with the shift register quiet during boot, the darlington array isn't; and pull-down
+			resistors don't seem to help. But I soon realize this is a stupid idea.
 		Replaced 1602 display with SSD1306 128x32 OLED
 		
 	Software:

README.md

@@ -14,6 +14,7 @@ Arduino Control for Your Vintage Stereo
 04-Jan-2020: Version 0.1.4 - Changed project name. Removed 1602 display code. Added 128x32 OLED code
 05-Jan-2020: Version 0.1.5 - Fixed stupid mistake in hardware. Flipped logic of srEnable for new circuit.
 05-Jan-2020: Version 0.1.6 - Lots of code clean-up, condensing, rewriting. 
+06-Jan-2020: Version 0.1.7 - More code clean-up, practical rewrite of main loop. Bitmapped the logo.
 ````
 
 

hifilogix.ino

@@ -1,17 +1,17 @@
 /*
-  HiFiLOGIX 0.1.6
+  HiFiLOGIX 0.1.7
 
-  dewdude@gmail.com - 05-JAN-2020
+  dewdude@gmail.com - 06-JAN-2019
   
  */
 #include <Wire.h>
 #include <U8g2lib.h>
 #include <IRremote.h>
+#include "logo.h" // XBMP data for logo.
 
-U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0); 
+U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, U8X8_PIN_NONE); 
-
-
 
+const char *inputs[] = {"TAPE-2","TAPE-1","AUX","TUNER","PHONO-2","PHONO-1"};
 int latchPin = 11;
 int clockPin = 9;
 int dataPin = 12;
@@ -19,19 +19,16 @@ int IRin = 7;
 int srEnable = 5;
 int matrix = A0;
 byte out = 0;
-int mx = 0;
 IRrecv remote(IRin);
 decode_results ircode;
 
- void logo() {
+void logo() // Logo is now bitmapped. Saves a good bit of space this way.
-  u8g2.clearBuffer();
+{ 
-  u8g2.setFont(u8g2_font_fewture_tr);  
+  u8g2.firstPage();
-  u8g2.drawStr(15,14,"HiFiLOGIX");  
+    do {
-  u8g2.setFont(u8g2_font_freedoomr10_tu);
+    u8g2.drawXBMP(14,4,hifilogix_width,hifilogix_height,hifilogix_bits);
-  u8g2.drawStr(14,30,"DENON PMA-770"); 
+    } while ( u8g2.nextPage() );
-  u8g2.sendBuffer();         
+} // I also borrowed this from an example. I'll figure out how it works later.
-  u8g2.setFont(u8g2_font_logisoso28_tr);
- }
 
 
 void updateShiftRegister()
@@ -41,14 +38,14 @@ void updateShiftRegister()
    digitalWrite(latchPin, HIGH);
 }
 
-void DontCrossTheStreams(byte op, int x, const char* i) // Oh yeah, this much nicer than 8 seperate functions.
+void DontCrossTheStreams(byte op, int x, int i) // Oh yeah, this much nicer than 8 seperate functions.
 {
     out = 0;
     updateShiftRegister();
     out = op; // No more bitset. This works better.
     updateShiftRegister();
     u8g2.clearBuffer();
-    u8g2.drawStr(x,30,i);
+    u8g2.drawStr(x,30,inputs[i]);
     u8g2.sendBuffer();
 // Don't cross the streams!
 }
@@ -63,40 +60,25 @@ void setup()
   remote.enableIRIn();
   logo(); // It's so pretty!
   delay(2000); // It takes the Denon about 4.5 seconds to kick speakers on.
-  DontCrossTheStreams(16,32,"AUX"); // Someday this will not be static.
+  u8g2.setFont(u8g2_font_logisoso28_tr); // Moved here since logo is bitmap.
+  DontCrossTheStreams(16,32,2); // Someday this will not be static.
   digitalWrite(srEnable,HIGH); // Now drives a logic inverter.
 }
 
-void loop() {
+void loop()
-
+{
 int mx = analogRead(matrix);
-  if (mx > 100 && mx < 200) DontCrossTheStreams(64,10,"TAPE-2"); // Byte value for outputs, X offset for display, text to display
+byte icode = 0; // I changed how I handed the inputs.
-  if (mx > 500 && mx < 600) DontCrossTheStreams(32,10,"TAPE-1");
-  if (mx > 900 && mx < 950) DontCrossTheStreams(16,32,"AUX");
-  if (mx > 1000) DontCrossTheStreams(8,18,"TUNER");
-  if (mx > 820 && mx < 899) DontCrossTheStreams(6,1,"PHONO-2");
 if (remote.decode(&ircode)) {
-    switch(ircode.value){
+    icode = ircode.value;
-      case 0xFF6897:
+    remote.resume();    
-        DontCrossTheStreams(64,10,"TAPE-2"); // Same thing except for remote input.
+  }
-        break;
+// I don't know if it improves things, but I sure like how much smaller this section is.
-      case 0xFF9867:
+if ((mx > 100 && mx < 200) || (icode == 0x97)) DontCrossTheStreams(64,10,0); // The code I originally used to figure out my
-        DontCrossTheStreams(32,10,"TAPE-1");
+if ((mx > 500 && mx < 600) || (icode == 0x67)) DontCrossTheStreams(32,10,1); // remote codes returned 3 bytes in hex. I can't 
-        break;
+if ((mx > 900 && mx < 950) || (icode == 0x4F)) DontCrossTheStreams(16,32,2); // remember what that code was, but I only need 
-      case 0xFFB04F:
+if ((mx > 1000) || (icode == 0xCF)) DontCrossTheStreams(8,18,3);             // the last bit with the remote I'm using. 
-        DontCrossTheStreams(16,32,"AUX");
+if ((mx > 820 && mx < 899) || (icode == 0xE7)) DontCrossTheStreams(6,1,4);   // I'm working on making the bare-bones utility I
-        break;
+if ((mx > 700 && mx < 800) || (icode == 0x85)) DontCrossTheStreams(5,1,5);   // wrote a bit more user-friendly.
-      case 0xFF30CF:
-        DontCrossTheStreams(8,18,"TUNER");
-        break;
-      case 0xFF18E7:
-        DontCrossTheStreams(6,1,"PHONO-2");
-        break;
-      case 0xFF7A85:
-        DontCrossTheStreams(5,1,"PHONO-1");
-        break;
-    }
-    remote.resume();
-    }
 delay(200);
 }