You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
127 lines
7.4 KiB
Markdown
127 lines
7.4 KiB
Markdown
---
|
|
title: VA QSO Party
|
|
layout: post
|
|
date: 2023-04-22 17:03:26
|
|
tags: Blog
|
|
excerpt_separator: <!--more-->
|
|
---
|
|
|
|
I really intended to write this last month, right after the contest. But I got lazy. Wrote a version...never got the photo
|
|
code inserted...mostly lost it. I go through times where I'm really horrible blog maintainer, and periods where I'm
|
|
somewhat prolific in my writings. This post is shorter and more to the point than the previous drafts...which may or may
|
|
not be a good thing.
|
|
|
|
I waited so long...preliminary log data for submitted logs is out. How'd I do? Well...there's a story.
|
|
|
|
<!--more-->
|
|
|
|
I know I was around for VAQP. But you know who wasn't? Murphy. Not being around to enforce his laws meant my untested
|
|
operating setup gave me zero problems; and where I expected a little casual fun, it all turned in to a serious drive
|
|
for QSOs and a performance far beyond what I remotely expected. Oh, I had fun; almost a little too much of it. What I had
|
|
assumed would work against me would be not being a very serious contester, losing much of my drive and interest after day 1,
|
|
and the fact I was using a bunch of mostly untested homebrew adapters for an operating setup I hadn't done a whole lot.
|
|
|
|
I'd had a passing interest in doing a hands-free setup with a headset and footswitch; I just didn't have the money to
|
|
buy a high-dollar headset; not that I thought I really needed one. All I really had to do was figure out how to wire
|
|
whatever headset I get up to the radio. I could build my adapters; and probably get what I really wanted. I ordered some
|
|
connectors, a cheap "gaming" headset, and started a few days before the contest.
|
|
|
|
## The Failures
|
|
<div class="img-row">
|
|
<div class="img-column-2">
|
|
<a href = "/images/electretconnector.jpg" target="_blank">
|
|
<img src="/images/thumb/electretconnector.jpg" style="width:100">
|
|
</a></div>
|
|
<div class="img-column-2">
|
|
<a href = "/images/electretboard.jpg" target="_blank">
|
|
<img src="/images/thumb/electretboard.jpg" style="width:100">
|
|
</a></div>
|
|
</div>
|
|
|
|
My attempts to interface my cheap headset with the radio failed. I'd adapted electrets to work with dynamic in the past;
|
|
you just have to feed power to the element and couple it in to the rig. So I managed to cram the required components into
|
|
the Yaesu mic connector. It worked...but it wasn't very sensitive and had a lot of noise. So I figured I was doing things
|
|
wrong and decided to look this up. The PCB version is the result; using a number of OM said worked. It didn't....not work;
|
|
but it changed nothing. The output was still noisy. Well, this wasn't going to work; but there was a second solution.
|
|
|
|
## The Alternate Solution
|
|
<div class="img-row">
|
|
<div class="img-column-3">
|
|
<a href = "/images/interfacebox.jpg" target="_blank">
|
|
<img src="/images/thumb/interfacebox.jpg" style="width:100">
|
|
</a></div>
|
|
<div class="img-column-3">
|
|
<a href = "/images/micboom.jpg" target="_blank">
|
|
<img src="/images/thumb/micboom.jpg" style="width:100">
|
|
</a></div>
|
|
<div class="img-column-3">
|
|
<a href = "/images/micbox.jpg" target="_blank">
|
|
<img src="/images/thumb/micbox.jpg" style="width:100">
|
|
</a></div>
|
|
</div>
|
|
|
|
The box contains no real electronics now; just two quarter-inch phone jacks to connect send PTT and Mic to the Yaesu, a
|
|
quarter-inch jack for the footswitch, and the 8-pin mic jack. With the headset itself being a no-go; I had to think of
|
|
another way of keeping hands-free. The mic I have for my Yaesu actually has a RJ-45 compatible jack on it with a cable
|
|
to an 8-pin plug. I made an Ethernet cable and used a coupler to extend the mic connection for the boom, and just shoved
|
|
the mic in the boom.
|
|
|
|
I was worried about noise and RF using a standard Ethernet cable; but I didn't have any. The footswitch worked as intended
|
|
and I got no audio complaints. If anything I had guys complimenting my audio. It had the desired effect; I could key the
|
|
rig while keeping hands free to log. This made things so much more easier.
|
|
|
|
## N1MM Voice Keyer
|
|
|
|
A couple of months ago when I was building the digital interface for the Yaesu; I settled on using the DVS-2 port method
|
|
as it provided more bandwidth; but it also would allow me to use a PC based voice keyer. I wouldn't have to do anything
|
|
except press a button in N1MM. It took me a little work to get N1MM keying interfaces figured out config wise; but that
|
|
was it. Press button, play CQ. For those who don't know: the FT1000MP had an optional voice module, the DVS-S. Essentially
|
|
a standalone voice recorder; it has some control over which audio is routed to/from the rig. So it can play your voice
|
|
recordings, let you preview them without transmitting, record from the mic, or record from the rig. But the nice thing is
|
|
when transmitting from the DVS-2; it automatically mutes your microphone. I make use of this for digital; as the 6khz width
|
|
is nice. But, easily enough; the control lines are just pulled high when transmitting from the unit. So they're tied in to
|
|
the RTS line on my digital interface.
|
|
|
|
It took me a couple of minutes to get it setup in N1MM; but once I did...it gave me no issues. I press button, rig transmits
|
|
a wav file.
|
|
|
|
# The Basic Operating Report
|
|
|
|
## Saturday
|
|
|
|
I had no intention of running a frequency at first; and didn't. I kind of searched up and down the bands working guys
|
|
already running. Naturally, the QSO rate was quite low. So after finding a spot on 40m, I decided to set-up and call
|
|
CQ. Well...that's when things got serious. At a rate of about 60 an hour; the few hours before dinner resulted in some
|
|
pretty decent numbers. I jumped down to 80m after dinner and despite the QRM; I ended the day at 369 QSOs. The bands
|
|
were overall in
|
|
|
|
## Sunday
|
|
|
|
I spent the first hour or two running a 40m phone frequency before taking a quick break. Finding myself a new frequency,
|
|
I would spend the next six hours on that frequency, pressing button, slowly getting QSOs. The band was..okay. I was
|
|
getting in to the NE well enough some guys responded just to tell me how much over 9 or how good my audio was. A couple
|
|
of mobile ops made regular stops to my frequency after crossing county lines. It was a far slower day than Saturday,
|
|
that's for sure. But I did the grind and came up with 653 QSOs.
|
|
|
|
Overall conditions were better than they had been in the past. I only had problems hearing the local guys...and one early
|
|
40m Oregon station.
|
|
|
|
# Preliminary Results
|
|
|
|
Prior to this past week I'd been relying on scores submitted to 3830 to gauge how well I did; and those results were
|
|
telling me something I didn't expect; I was actually leading a category. My 103,224 points was the highest submitted
|
|
for mixed-band low-power phone. Yeah...I don't know how I did that; but I decided to save my excitement for the final
|
|
results. A draft version of the log data came out on the 17th. Know what it said?
|
|
|
|
I had the top score for mixed-band low-power phone.
|
|
|
|
I carefully converted the PDF in to something I could work with; and after verifying my data filtering and sorting at
|
|
least three times; I got the same result. 29th highest score out of 620-some logs; 24th highest number of QSOs, and 1st
|
|
for mixed low phone. Far far beyond what I expected to do.
|
|
|
|
Chances are I'll come away with a plaque; as mixed low phone is a plaque they give out. That was not a goal I was actually
|
|
reaching for; but I guess it's one of those few times you "miss the mark" and hit a better target. There were a lot of
|
|
things that should have worked against me; but everything worked for me.
|
|
|
|
Talk About This Post [here.](https://forum.nq4t.com/viewtopic.php?t=19)
|